Dot1X Quiet-Period - Dell S4810 Reference Manual

Version 8.3.7.0
Version 7.6.1.0
Version 7.4.1.0
Usage The authenticator performs authentication only when port-control is set to
Information
auto.

dot1x quiet-period

Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
S4810
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds
Defaults 30 seconds
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.4.1.0
dot1x reauthentication
Enable periodic re-authentication of the client.
S4810
Syntax
dot1x reauthentication [interval seconds]
To disable periodic re-authentication, use the no dot1x reauthentication
command.
1494
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter the number of seconds. The range is from 1 to 65535.
The default is 30.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Security