Show Spanning-Tree Pvst - Dell S4810 Reference Manual

show spanning-tree pvst

View the Per-VLAN spanning tree configuration.
S4810
Syntax
show spanning-tree pvst [vlan vlan-id] [brief] [guard]
Parameters
vlan vlan-id
brief
interface
guard
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.5.1.0
Version 8.4.2.1
Per-VLAN Spanning Tree Plus (PVST+)
(OPTIONAL) Enter the keyword vlan then the VLAN ID. The
range is 1 to 4094.
(OPTIONAL) Enter the keyword brief to view a synopsis of
the PVST+ configuration information.
(OPTIONAL) Enter one of the interface keywords along with
the slot/port information:
• For a Port Channel interface, enter the keyword port-
channel then a number: The range is 1 to 128.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/ port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
(OPTIONAL) Enter the keyword guard to display the type of
guard enabled on a PVST interface and the current port state.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Support for the optional guard keyword was added on the
C-Series, S-Series, and E-Series TeraScale.
1315