Description - Dell S4810 Reference Manual

Parameters
number
Defaults 1
Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Usage This command ensures that route information being redistributed is converted to
Information the same metric value.
Related redistribute
Commands

description

Enter a description of the RIP routing protocol.
S4810
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
1384
Specify a number. The range is from 1 to 16. The default is 1.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— allows you to redistribute routes learned by other methods.
Enter a description to identify the RIP protocol (80
characters maximum).
Routing Information Protocol (RIP)