Dell S4810 Reference Manual page 1293

•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.4.1.1
Version 8.1.1.0
Version 7.8.1.0
Example
Dell# show ip pim summary
PIM TIB version 495
Uptime 22:44:52
Entries in PIM-TIB/MFC : 2/2
Active Modes :
Interface summary:
TIB summary:
Message summary:
Data path event summary:
PIM-Sparse Mode (PIM-SM)
EXEC Privilege
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Support for the display of PIM-SM snooping status was
added on E-Series ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
PIM-SNOOPING
1 active PIM interface
0 passive PIM interfaces
3 active PIM neighbors
1/1 (*,G) entries in PIM-TIB/MFC
1/1 (S,G) entries in PIM-TIB/MFC
0/0 (S,G,Rpt) entries in PIM-TIB/MFC
0 PIM nexthops
0 RPs
0 sources
0 Register states
2582/2583 Joins sent/received
5/0 Prunes sent/received
0/0 Candidate-RP advertisements sent/received
0/0 BSR messages sent/received
0/0 State-Refresh messages sent/received
0/0 MSDP updates sent/received
0/0 Null Register messages sent/received
0/0 Register-stop messages sent/received
0 no-cache messages received
0 last-hop switchover messages received
0/0 pim-assert messages sent/received
0/0 register messages sent/received
1293