Show Lldp Statistics - Dell S4810 Reference Manual

Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Usage Omitting the keyword detail displays only the remote chassis ID, Port ID, and
Information
Dead Interval.
Example
R1(conf-if-gi-1/31)#do show lldp neighbors
Loc PortID Rem
--------------------------------------------------------------
Gi 1/21
Gi 1/31

show lldp statistics

Display the LLDP statistical information.
S4810
Syntax
show lldp statistics
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Example
Dell#show lldp statistics
Total number of neighbors: 300
Last table change time
Number of Table Inserts
Number of Table Deletes
Link Layer Discovery Protocol (LLDP)
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Host Name
R2 GigabitEthernet
R3 GigabitEthernet
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
:
:
:
Rem Port Id Rem Chassis Id
2/11 00:01:e8:06:95:3e
3/11 00:01:e8:09:c2:4a
Mon Oct 02 16:00:52 2006
1621
200
1081