Show Isis Database - Dell S4810 Reference Manual

show isis database

Display the IS-IS link state database.
S4810
Syntax
show isis database [level-1 | level-2] [local] [detail |
summary] [lspid]
Parameters
level-1
level-2
local
detail
summary
lspid
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.7.1
Usage The following describes the show isis database command shown in the
Information following example.
Field
IS-IS Level-1/
Level-2 Link State
Database
LSPID
Intermediate System to Intermediate System (IS-IS)
(OPTIONAL) Displays the Level 1 IS-IS link-state database.
(OPTIONAL) Displays the Level 2 IS-IS link-state database.
(OPTIONAL) Displays local link-state database information.
(OPTIONAL) Detailed link-state database information of each
LSP displays when specified. If not specified, a summary
displays.
(OPTIONAL) Summary of link-state database information
displays when specified.
(OPTIONAL) Display only the specified LSP.
EXEC
EXEC Privilege
Introduced on the Z9000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Description
Displays the IS-IS link state database for Level 1 or Level 2.
Displays the LSP identifier.
1009