Aaa Authentication Login - Dell S4810 Reference Manual

Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.0
Usage
By default, the Enable password is used. If you configure aaa authentication
Information
enable default, Dell Networking OS uses the methods defined for Enable
access instead.
Methods configured with the aaa authentication enable command are
evaluated in the order they are configured. If authentication fails using the primary
method, Dell Networking OS employs the second method (or third method, if
necessary) automatically. For example, if the TACACS+ server is reachable, but the
server key is invalid, Dell Networking OS proceeds to the next authentication
method. The TACACS+ is incorrect, but the user is still authenticated by the
secondary method.
Related
enable password
Commands
login authentication
password
radius-server host
tacacs-server host

aaa authentication login

Configure AAA Authentication method lists for user access to EXEC mode (Enable log-in).
S4810
Syntax
aaa authentication login {method-list-name | default} method
[... method4]
To return to the default setting, use the no aaa authentication login
{method-list-name | default} command.
Parameters
method-list-
name
default
method
Security
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the password for the enable command.
— enables AAA login authentication on the terminal lines.
— creates a password.
— specifies a RADIUS server host.
— specifies a TACACS+ server host.
Enter a text string (up to 16 characters long) as the name of a
user-configured method list that can be applied to different
lines.
Enter the keyword default to specify that the method list
specified is the default method for all terminal lines.
Enter one of the following methods:
1453