Show Ip Igmp Interface - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

Group Address Interface Mode Uptime Expires Last Reporter

Member Ports: Po 2*

Member Ports: Po 2*

Member Ports: Po 2*

Member Ports: Po 2*

Member Ports: Po 2*

show ip igmp interface

View information on the interfaces participating in IGMP.

show ip igmp interface [interface]

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Internet Group Management Protocol (IGMP)

Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51

(OPTIONAL) Enter the interface type and slot/port

information:

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

For a 100/1000 Ethernet interface, enter the keyword

gigabitethernet followed by the slot/port

information.

For a 1-Gigabit Ethernet interface, enter the keyword

gigabitethernet followed by the slot/port

information.

For a 10-Gigabit Ethernet interface, enter the keyword

tengigabitethernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

EXEC Privilege

Introduced on the S6000.