Sflow Enable (Global) - Dell S4810 Reference Manual

sflow enable (Global)

Enable sFlow globally.
S4810
Syntax
sflow enable
To disable sFlow, use the no sflow enable command.
Defaults Disabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.7.1.0
Version 7.6.1.0
Version 6.2.1.1
Usage sFlow is disabled by default. In addition to this command, sFlow needs to be enable
Information on individual interfaces where sFlow sampling is desired.
Related sflow enable (Interface)
Commands
sflow enable (Interface)
Enable sFlow on interfaces.
S4810
Syntax
sflow enable
To disable sFlow, use the no sflow enable command.
sFlow
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enables sFlow on interfaces.
1545