Dell S4810 Reference Manual page 1291

Hide thumbs Also See for S4810:

Table of Contents

group-address

source-address

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.4.1.1

The following describes the show ip pim snooping tib commands shown in

the following example.

PIM-Sparse Mode (PIM-SM)

(OPTIONAL) Enter the group address in dotted decimal

format (A.B.C.D) to display TIB information PIM-SM snooping

discovered for a specified multicast group.

(OPTIONAL) Enter the source address in dotted decimal

format (A.B.C.D) to display TIB information PIM-SM snooping

discovered for a specified multicast source.

EXEC Privilege

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Displays the entry in the PIM multicast snooping database.

Displays the amount of time the entry has been in the PIM

multicast route table.

Displays the amount of time until the entry expires and is

removed from the database.

Displays the IP address of the RP/source for this entry.

List the flags to define the entries:

S = PIM Sparse Mode

C = directly connected

L = local to the multicast group

P = route was pruned

R = the forwarding entry is pointing toward the RP

F = Dell Networking OS is registering this entry for a

multicast source

T = packets were received via Shortest Tree Path

J = first packet from the last hop router is received and

the entry is ready to switch to SPT