Dell S4810 Reference Manual page 1294

Memory usage:
show ip pim tib
View the PIM tree information base (TIB).
S4810
Syntax
show ip pim tib [group-address [source-address]]
Parameters
group-address
source-address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.8.1.0
Usage The following describes the show ip pim tib command shown in the following
Information
example.
Field
(S, G)
uptime
1294
TIB
Nexthop cache
Interface table : 992 bytes
Neighbor table
RP Mapping
(OPTIONAL) Enter the group address in dotted decimal
format (A.B.C.D).
(OPTIONAL) Enter the source address in dotted decimal
format (A.B.C.D).
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Displays the entry in the multicast PIM database.
Displays the amount of time the entry has been in the PIM
route table.
: 3768 bytes
: 0 bytes
: 528 bytes
: 0 bytes
PIM-Sparse Mode (PIM-SM)