Debug Ip Ospf - Dell S4810 Reference Manual

Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related show ip ospf statistics
Commands

debug ip ospf

Display debug information on OSPF. Entering the debug ip ospf commands enables OSPF debugging
for the first OSPF process.
S4810
Syntax
debug ip ospf [process-id] [vrf vrf-name] [bfd |event | packet
| spf | database-timer rate-limit]
To cancel the debug command, use the no debug ip ospf command.
Parameters
process-id
vrf vrf-name
bfd
event
packet
spf
database-timer
rate-limit
Open Shortest Path First (OSPFv2 and OSPFv3)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays the OSPF statistics.
Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
Enter the keyword vrf to view debugging information on
OSPF corresponding to that VRF.
(OPTIONAL) Enter the keyword bfd to debug only OSPF BFD
information.
(OPTIONAL) Enter the keyword event to debug only OSPF
event information.
(OPTIONAL) Enter the keyword packet to debug only OSPF
packet information.
(OPTIONAL) Enter the keyword spf to display the Shortest
Path First information.
(OPTIONAL) Enter the keywords database-timer rate-
limit to display the LSA throttling timer information. This
applies to the S4810 platform only.
1153