Private-Vlan Mode - Dell S4810 Reference Manual

Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Related

private-vlan mode

Commands
or primary.
private-vlan mapping secondary-vlan
primary VLAN.
show arp
switchport mode private-vlan
private-vlan mode
Set PVLAN mode of the selected VLAN to community, isolated, or primary.
S4810
Syntax
[no] private-vlan mode {community | isolated | primary}
To remove the PVLAN configuration, use the no private-vlan mode
{community | isolated | primary} command syntax.
Parameters
community
isolated
primary
Defaults none
Command INTERFACE VLAN
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Private VLAN (PVLAN)
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
— sets the mode of the selected VLAN to community, isolated,
— displays the ARP table.
— sets PVLAN mode of the selected port.
Enter the keyword community to set the VLAN as a
community VLAN.
Enter the keyword isolated to configure the VLAN as an
isolated VLAN.
Enter the keyword primary to configure the VLAN as a
primary VLAN.
Introduced on the S6000.
— maps secondary VLANs to the selected
1307