Maximum-Paths; Passive-Interface - Dell S4810 Reference Manual

Version
8.3.19.0
Version 7.8.1.0
Version 7.4.1.0

maximum-paths

Enable the software to forward packets over multiple paths.
S4810
Syntax
maximum-paths number
To disable packet forwarding over multiple paths, use the no maximum-paths
command.
Parameters
number
Defaults 8
Command ROUTER OSPF
Modes
Command
Version
History
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1

passive-interface

Disable (suppress) sending routing updates on an interface.
S4810
Syntax
passive—interface interface
To enable sending routing updates on an interface, use the no passive-
interface interface command.
1246
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
Specify the number of paths. The range is from 1 to 64. The
default is 8 paths.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)