Rapid Spanning Tree Protocol (Rstp) - Dell S4810 Reference Manual

Rapid Spanning Tree Protocol (RSTP)

The Dell Networking operating software implementation of rapid spanning tree protocol (RSTP) is based
on the IEEE 802.1w standard spanning-tree protocol. The RSTP algorithm configures connectivity
throughout a bridged local area network (LAN) that is comprised of LANs interconnected by bridges.
Dell Networking OS supports RSTP on the S4810 platform.
bridge-priority
Set the bridge priority for RSTP.
S4810
Syntax
bridge-priority priority-value
To return to the default value, use the no bridge-priority command.
Parameters
priority-value
Defaults 32768
Command CONFIGURATION RSTP (conf-rstp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
1424
Enter a number as the bridge priority value in increments of
4096. The range is from 0 to 61440. The default is 32768.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Rapid Spanning Tree Protocol (RSTP)
49