Show Isis Interface - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

FTOS#show isis hostname

*F100.E120.0013 Force10

show isis interface

Display detailed IS-IS interface status and configuration information.

show isis interface [interface]

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Intermediate System to Intermediate System (IS-IS)

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Dynamic Name Static Name

(OPTIONAL) Enter the following keywords and slot/port or

number information:

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a VLAN, enter the keyword vlan then a number from

EXEC Privilege