Show Ip Protocols - Dell S4810 Reference Manual

Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version 8.4.1.0
Version 8.3.7.0
Example
Dell#show ipv6 management-route
IPv6 Destination
----------------
2001:34::0/64
2001:68::0/64
Dell#

show ip protocols

View information on all routing protocols enabled and active on the switch.
S4810
Syntax
show ip protocols
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.6.1.0
Version 7.5.1.0
894
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the C- and E-Series.
Introduced on the S4810.
Gateway
-------
ManagementEthernet 0/0
2001:34::16
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Regular evaluation optimization enabled/disabled added to
display output.
Introduced on the S-Series.
Introduced on the C-Series.
State
-----
Connected
Active
IPv4 Routing