Snmp-Server Location - Dell S4810 Reference Manual

4.
5.
Related
snmp-server enable traps
Commands
snmp-server community

snmp-server location

Configure the location of the SNMP server.
S4810
Syntax
snmp-server location text
To delete the SNMP location, use the no snmp-server location command.
Parameters
text
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Simple Network Management Protocol (SNMP) and Syslog
Enable traps.
Configure a host to receive informs.
— enables SNMP traps.
— configures a new community SNMPv1 or SNMPv2c.
Enter an alpha-numeric text string, up to 55 characters long.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
1571