Dell S4810 Reference Manual page 690

interface
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Usage If no ports are GVRP participants, the message output changes from GVRP
Information Participants running on <port_list> to GVRP Participants running
on no ports.
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port
----------------------------------------------
Gi 3/0
Gi 3/1
Gi 3/2
Gi 3/3
Gi 3/4
Gi 3/5
Gi 3/6
Gi 3/7
Gi 3/8
R3#show gvrp brief
Related show gvrp statistics
Commands
690
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
GVRP Status
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
— displays the GVRP statistics.
Edge-Port
No
No
No
No
No
No
No
No
No
GARP VLAN Registration (GVRP)