Distribute-List Out - Dell S4810 Reference Manual

Related
•
Commands
•

distribute-list out

Suppress network prefixes from being advertised in outbound updates.
S4810
Syntax
distribute-list prefix-list-name out [connected | bgp as number
| ospf process-id | rip | static]
To return to the default values, use the no distribute-list prefix-list-
name out [bgp as number connected | ospf process-id | rip |
static] command.
Parameters
prefix-list-
name
connected
ospf process-id
bgp as number
rip
static
Defaults Not configured.
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
968
distribute-list out — suppresses networks from being advertised in updates.
redistribute — redistributes routes from one routing domain to another routing
domain.
Specify the prefix list to filter prefixes in routing updates.
(OPTIONAL) Enter the keyword connected for directly
connected routing process.
(OPTIONAL) Enter the keyword ospf then the OSPF
process-ID number. The range is from 1 to 65535.
(OPTIONAL) Enter the BGP then the AS Number. The range is
from 1 to 65535.
(OPTIONAL) Enter the keyword rip for RIP routes.
(OPTIONAL) Enter the keyword static for user-configured
routing process.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Introduced on the S6000.
Introduced on the S4820T.
Intermediate System to Intermediate System (IS-IS)