Ip Multicast-Limit - Dell S4810 Reference Manual

distance
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.7.0
E-Series legacy
command
Related show ip mroute
Commands

ip multicast-limit

To limit the number of multicast entries on the system, use this feature.
S4810
Syntax
ip multicast-limit limit
Parameters
limit
Defaults The S-Series default is 400.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.7.0
Multicast
(OPTIONAL) Enter a number as the distance metric assigned
to the mroute. The range is from 0 to 255.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
— views the E-Series routing table.
Enter the desired maximum number of multicast entries on
the system. The S-Series range is from 1 to 2000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
1135