Rate-Shape - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

qos-policy-input

rate-shape

Shape traffic output as part of the designated policy.

rate-shape [kbps] rate [burst-KB]

Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.

QOS-POLICY-OUT

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

qos-policy-output

service-policy input

Apply an input policy map to the selected interface.

service-policy input policy-map-name [layer2]

— specifies traffic policing on the selected interface.

— creates a QoS output policy.

Enter the keyword kbps to specify the rate limit in Kilobits

per second (Kbps). Make the following value a multiple of 64.

The range is from 0 to 40000000. The default granularity is

Megabits per second (Mbps).

The range is from 10 to 40000.

(OPTIONAL) Enter the burst size in KB. The range is from 0 to

40000. The default is 100.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

— shapes traffic output as part of the designated policy.

— creates a QoS output policy.

Quality of Service (QoS)