Advertise Management-Tlv (Interface) - Dell S4810 Reference Manual

Version 9.1.
(0.0)
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Usage The command options management-address,system-capabilities, system-
Information description, and system-name can be invoked individually or together, in any
sequence.

advertise management-tlv (Interface)

Advertise management type, length, values (TLVs) to the specified interface.
S4810
Syntax
advertise management-tlv {management-address | system-
capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management-
tlv {management-address | system-capabilities | system-
description | system-name} command.
Parameters
management-
address
system-
capabilities
system-
description
system-name
Defaults none
Command INTERFACE (conf-interface-lldp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Link Layer Discovery Protocol (LLDP)
Modified to support management-address parameter.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keywords management-address to advertise the
management IP address TLVs to the specified interface.
Enter the keywords system-capabilities to advertise the
system capabilities TLVs to the specified interface.
Enter the keywords system-description to advertise the
system description TLVs to the specified interface.
Enter the keywords system-name to advertise the system
name TLVs to the specified interface.
1071