Show Mac-Address-Table Aging-Time - Dell S4810 Reference Manual

Line Beginning
With
Total MAC...
Example
Dell# show mac-address-table count
(Count)
MAC Entries for all vlans :
Dynamic Address Count :
Static Address (User-defined) Count : 0
Sticky Address Count :
Total Synced Mac from Peer(N):
Total MAC Addresses in Use:
Dell#
Related

show mac-address-table aging-time

Commands
show mac-address-table aging-time
Display the aging times assigned to the MAC addresses on the switch.
S4810
Syntax
show mac-address-table aging-time [vlan vlan-id]
Parameters
vlan vlan-id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 7.7.1.0
pre-Version
6.2.1.1
1044
Description
Lists the total number of MAC addresses the switch uses.
(OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is
from 1 to 4094.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added the vlan option on the E-Series.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
110
0
100
110
— displays MAC aging time.
Layer 2