Dns-Server; Domain-Name - Dell S4810 Reference Manual

Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

dns-server

Assign a DNS server to clients based on address pool.
S4810
Syntax
dns-server address [address2...address8]
Parameters
address
Defaults none
Command DHCP <POOL>
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

domain-name

Assign a domain to clients based on the address pool.
S4810
Syntax
domain-name name
Parameters
name
Dynamic Host Configuration Protocol (DHCP)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter a list of DNS servers that may service clients on the
subnet. You may list up to eight servers, in order of
preference.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Give a name to the group of addresses in a pool.
613