Show Policy Service Group - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show policy service group

show policy service group
Displays information about pending and applied policy service groups.
show [applied] policy service group [service_group]
Syntax Definitions
applied
service_group
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Information for all policy service groups displays unless service_group is specified.
Examples
-> show policy service group
Group Name
State
Entries
output definitions
Group Name
State
Entries
page 26-156
Indicates that only service groups that have been applied should be
displayed.
The name of the service group for which you want to display informa-
tion; or a wildcard sequence of characters for displaying information
about service groups with similar names. Use an asterisk (*) to indicate
a wildcard character.
: mgmt
= new,
= ftp,
http,
https,
snmp,
ssh,
telnet
The name of the port group, configured through the policy service
group command.
This field appears if the group was created or modified but not yet
applied to the QoS configuration. When the qos apply command is
issued, this field no longer displays.
The services associated with the group. Services are configured through
the policy service command.
QoS Policy Commands
OmniSwitch CLI Reference Guide March 2011