Session Timeout - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Session Management Commands

session timeout

Configures the inactivity timer for a CLI, HTTP (including WebView), or FTP interface. When the switch
detects no user activity for this period of time, the user is logged off the switch.
session {cli | http | ftp} timeout minutes
Syntax Definitions
cli
http
ftp
minutes
Defaults
parameter
minutes
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The inactivity timer value may be different for each type of interface, such as CLI (Console, Telnet),
HTTP (including WebView), and FTP.
•
If you change the timer, the new value does not affect current sessions; the new timer is applied to new
sessions only.
Examples
-> session cli timeout 5
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
Sets the inactivity timeout for CLI sessions.
Sets the inactivity timeout for HTTP sessions.
Sets the inactivity timeout for FTP sessions.
Inactivity timeout value (in minutes). Valid range 1 to 596523.
default
4
March 2011
session timeout
page 41-7