QoS Commands
Usage Guidelines
•
The default WRED profile (WRP 1) is automatically assigned to all VOQ queue set (QSet) profiles and
to individual queue profiles within the QSet. As a result, it is only necessary to configure new WRED
profiles if the existing default profile settings are not sufficient.
•
Use the no form of this command to remove WRED profile 2, 3, or 4 from the switch configuration.
Note that the default WRP 1 cannot be deleted, however, WRP 1 parameters can be changed.
•
Each time a WRED profile is created, the new profile inherits the default WRP 1 parameter settings if
specific parameter values are not specified at the time the profile is created.
•
Once a profile is created, the next step is to assign that profile to a QSet.
•
To modify parameters for an existing profile, specify the ID number or name of the profile then the
specific parameter values to change.
•
Specify either the ID number or alphanumeric name when creating a WRED profile, not both at the
same time. If a WRP name is specified instead of a WRP ID, the ID assigned to the WRED profile is
the next available profile number. For example, if WRP 1 and 2 exist, the next profile created without
specifying an ID number is assigned WRP ID 3.
•
Setting the minimum, maximum, and probability thresholds to the same percentage value creates a
color blind WRED profile.
Examples
-> qos wred wrp-id 1 admin-state disable
-> qos wred wrp-id 2
-> qos wred wrp-name colorsense1 color g min 30 max 90 pb 4 y min 25 max 85 pb 5
-> qos wred wrp-name colorblind color g min 30 max 90 pb 4 y min 30 max 90 pb 4 r
min 30 max 90 pb 4
-> qos wred wrp-name colorblind color all min 30 max 90 pb 4
-> no qos wred wrp-id 2
Release History
Release 7.1.1; command was introduced.
Related Commands
qos qset
show qos wred
MIB Objects
alcatelIND1VfcMIB
alaVfcWREDProfileTable
alaVfcWRPId
alaVfcWRPAdminState
alaVfcWRPName
alaVfcWRPGreenMinThreshold
alaVfcWRPGreenMaxThreshold
alaVfcWRPGreenMaxDropProbability
alaVfcWRPGreenGain
alaVfcWRPYellowMinThreshold
OmniSwitch CLI Reference Guide
Configures a QSet profile
Displays the WRED profile configuration.
March 2011
qos wred
page 25-47