Qos Log Level - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

qos log level

qos log level
Configures the level of log detail.
qos log level level
qos no log level
Syntax Definitions
level
Defaults
parameter
level
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the qos debug command to change the type of debugging messages that are logged. The qos log
level command configures the level of detail for these messages.
•
If the qos debug command is not configured to log any kind of information (this is the default), the qos
log level command has no effect.
•
To log fatal errors only, set the log level to 0.
•
Note that a high log level value will impact the performance of the switch.
Examples
-> qos log level 4
-> qos log level 0
Release History
Release 7.1.1; command was introduced.
page 25-10
The level of log detail, in the range from 1 (least detail) to 8 (most
detail).
default
5
OmniSwitch CLI Reference Guide
QoS Commands
March 2011