Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1633

QoS Commands
output definitions
QSAP
Parent
Admin
QSI
QSP, Name, Type
WRP, Name, Admin, Oper
Scheduler
Stats-Admin, Stats-Oper
BW Admin (%)
BW Oper (Mbps)
QI 1–8
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
The QSet attachment point (QSAP) ID number. This is a logical entity
generated internally by the switch to identify the association between a
QSet instance and a port or link aggregate. The QSAP is not config-
urable at this time.
The parent QSAP ID. If the parent ID is different than the QSAP ID,
then the port is a member of a link aggregate.
The administrative status of the QSAP.
The QSet instance (QSI) ID number, internally generated by the switch.
The QSet profile (QSP) ID number and name associated with the QSI.
Configured through the
QSP, which is one of the pre-defined, default profiles (QSP 1–4) cur-
rently supported. User-configured, dynamic profiles are not supported
at this time.
The WRED profile (WRP) ID number associated with the QSet profile
that is assigned to the QSI. Configured through the
Also indicates the administrative and operational status of the WRP for
the QSI. The WRP administrative status for the QSI is configured
through the qos qsi
The scheduling method used, such as queue specific priority (Qspec) or
strict priority.
The administrative and operational status of statistics collection for this
QSI. The administrative status of statistics collection for the QSI is con-
figured through the
The administrative percentage of bandwidth (currently not user-config-
urable).
The operational amount of bandwidth as determined by the port speed.
For a link aggregate, this value is the sum of the operational bandwidths
for the member ports.
The queue scheduling and bandwidth configuration for each QSI
queue. These values are determined by which one of the four QSet pro-
files (QSP 1–4) is associated with the QSI.
March 2011
qos qsi command. Also indicates the type of
command.
qos qsi command.
show qos qsi
qos qset command
page 25-73