Snmp Community-Map - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

SNMP Commands

snmp community-map

Configures and enables a community string on the switch and maps it to an existing user account name.
snmp community-map community_string {[user useraccount_name] | {enable | disable}}
no snmp community-map community_string
Syntax Definitions
community_string
useraccount_name
enable
disable
Defaults
By default, SNMP community map authentication is enabled.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Community strings configured on the switch are used for v1 and v2c SNMP managers only.
•
The user account name must be a current user account recognized by the switch. For a list of current
user names use the
•
There is one to one mapping between each community string and a user account name.
•
Privileges attached to the community string are the ones inherited from the user account name that
created it.
Examples
-> snmp community-map community1 user testname1
-> snmp community-map community1 enable
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
A community string in the form of a text string. This string must be
between 1 and 32 characters.
A user name in the form of a text string. This name must match a user
login account name already configured on the switch or configured
remotely on an external AAA server. This user name must be between 1
and 32 characters.
Enables SNMP community string mapping.
Disables SNMP community string mapping.
show user command. To create a new user account, use the
March 2011
snmp community-map
user command.
page 45-7