SNMP Commands
show snmp security
Displays the current SNMP security status.
show snmp security
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Refer to the command on page
authentication set, authentication all, privacy set, privacy all, and trap only.
Examples
-> show snmp security
snmp security = no security
-> show snmp security
snmp security = authentication set
-> show snmp security
snmp security = authentication all
-> show snmp security
snmp security = privacy set
-> show snmp security
snmp security = privacy all
-> show snmp security
snmp security = trap only
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
45-11
for descriptions of the five SNMP security states: no security,
March 2011
show snmp security
page 45-13