Session Management Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

41 Session Management
Session Management commands are used to monitor and configure operator sessions including FTP,
Telnet, HTTP (WebView), console, Secure Shell, and Secure Shell FTP on the switch. (See the SNMP
Commands chapter for SNMP session commands.) Maximum number of concurrent sessions allowed:
Telnet(v4)
FTP(v4)
SSH + SFTP(v4)
HTTP
MIB information for commands in this chapter are as follows:
Filename: AlcatelInd1SessionMgr.mib
Module: AlcatelIND1SessionMgrMIB
Filename: AlcatelIND1AAA.mib
Module: Alcatel-IND1-AAA-MIB
Filename: AlcatelIND1System.mib
Module: Alcatel-IND1ConfigMgr.mib
Filename: AlcatelIND1Ssh.mib
Module: ALCATEL-IND1-SSH-MIB
OmniSwitch CLI Reference Guide March 2011
Commands
OmniSwitch 10K
4
4
8
4
page 41-1