Show Port-Mapping - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show port-mapping

show port-mapping
Displays the configuration of one or more port mapping sessions.
show port-mapping [port_mapping_sessionid]
Syntax Definitions
port_mapping_sessionid
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If you do not specify the port mapping session ID, then the user port and network port information are
displayed for all the port mapping sessions active on the switch.
Examples
-> show port-mapping 3
SessionID
-----------+----------------+------------------
1
1
1
output definitions
SessionID
USR-PORT
NETWORK-PORT
Release History
Release 7.1.1; command introduced.
page 29-12
The port mapping session ID.
USR-PORT NETWORK-PORT
1/2
1/6
1/7
Displays the port mapping session ID.
Displays the set of user ports of a port mapping session.
Displays the set of network ports of a port mapping session.
1/3
OmniSwitch CLI Reference Guide
Port Mapping Commands
March 2011