show qos wred
show qos wred
Displays the Weighted Random Early Detection (WRED) drop profile configuration for the switch.
show qos wred [wrp-id wrp_id | wrp-name name] [detail [port slot/port[-port]] | slot slot | linkagg
agg_id[-agg_id]]]
Syntax Definitions
wrp_id
name
detail
slot/port[-port]
slot
agg_id[-agg_id]
Defaults
By default, displays all the WRED drop profiles in the switch configuration.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the wrp-id wrp_id and wrp-name name parameters to display information for a specific profile.
•
Use the detail parameter to display additional profile information, such as the profile configuration
associated with queues and ports.
•
Use the port slot/port, slot slot, and linkagg agg_id parameters to display profile information associ-
ated with specific ports or link aggregates. These parameters are used in combination with the detail
parameter.
Examples
-> show qos wred
WRP
1 (wrp-1)
Admin: Ena, #Ports:
Red
Min-Th:
20, Max-Th:
Yellow
Min-Th:
30, Max-Th:
Green
Min-Th:
40, Max-Th:
page 25-64
A WRED profile (WRP) ID number. The valid range is 2–16.
A WRED profile name.
Displays WRED profile configuration details for a port, slot, or link
aggregate.
A physical slot and port number. Use a hyphen to specify a range of
ports (1/5-10).
A slot number. Displays information for all ports on the slot.
The link aggregate ID. Use a hyphen to specify a range of IDs (10-15).
480, MTU:
1540
90, Max-Pb:
36, Gain:
90, Max-Pb:
30, Gain:
90, Max-Pb:
24, Gain:
9
9
9
OmniSwitch CLI Reference Guide
QoS Commands
March 2011