ftp
ftp
Starts an FTP session.
ftp {port [default | service_port] | admin-state [enable | disable] | host_name | ip_address}
Syntax Definitions
default
service_port
enable | disable
host_name
ip_address
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
You must have a valid username and password for the specified host.
•
The default FTP directory is /flash.
Examples
-> ftp port 20000
-> ftp admin-state disable
-> ftp 172.17.6.228
Release History
Release 7.1.1; command introduced.
page 42-36
Sets the port back to the default of 21.
The TCP service port number. Must be 21 or between between 20000-
20999.
Enables or disables FTP access.
Specifies the host name for the FTP session.
Specifies the IP address for the FTP session.
File Management Commands
OmniSwitch CLI Reference Guide
March 2011