Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1987

VLAN Stacking Commands
Defaults
parameter
shared | not shared
mbps
preserve | translate
not-assigned | map-inner-to-
outer-p | map-dscp-to-outer-p |
fixed value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to delete a SAP profile.
•
If a profile is not specified when a SAP is created, a default profile (default-sap-profile) is
automatically associated with the SAP.
•
Use the ethernet-service sap sap-profile command to associate a profile to a VLAN Stacking SAP.
•
Only one SAP profile name is associated with each SAP ID; however, it is possible to associate the
same SAP profile name to multiple SAP IDs.
•
Configure the ingress-bandwidth or egress-bandwidth parameters to define rate limiting values for
the SAP.
Examples
-> ethernet-service sap-profile video1 egress-bandwidth 10 cvlan-tag translate
priority map-inner-to-outer-p
-> ethernet-service sap-profile voice1 not-shared ingress-bandwidth 10 cvlan-tag
preserve
-> ethernet-service sap-profile voice2 shared ingress-bandwidth 10
-> no ethernet-service sap-profile video1
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
default
shared
0
preserve
fixed 0
March 2011
ethernet-service sap-profile
page 34-19