qos revert
qos revert
Deletes any QoS configuration that has not been applied to the configuration through the qos apply
command.
qos revert
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use this command to remove currently configured policies that have not yet been activated through the
qos apply command.
Examples
-> qos revert
Release History
Release 7.1.1; command was introduced.
Related Commands
policy rule
qos apply
qos reset
MIB Objects
alaQoSConfigTable
alaQoSConfigRevert
page 25-24
Configures a policy rule and saves it to the current configuration but
does not make it active on the switch.
Applies all QoS settings configured on the switch to the current configu-
ration.
Resets the QoS configuration to its defaults.
OmniSwitch CLI Reference Guide
QoS Commands
March 2011