Show Qos Config - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Commands

show qos config

Displays global information about the QoS configuration.
show qos config
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use this command to view the current global configuration for QoS. Use the show qos statistics
command to view statistics about the QoS software in the switch.
Examples
-> show qos config
QoS Configuration,
Admin
Trust ports
Phones
Log lines
Log level
Log console
Forward log
Stats interval
User-port filter
User-port shutdown
Debug
Pending changes
output definitions
Admin
Trust Ports
Phones
Log lines
Log level
OmniSwitch CLI Reference Guide
= enable,
= no,
= trusted,
= 10240,
= 5,
= no,
= no,
= 5,
= spoof,
= none,
= info,
= port
Whether or not QoS is enabled or disabled. Configured through the
command.
The default trusted mode for switch ports. Configured through the
trust ports command.
Whether or not IP Phone traffic is automatically trusted or assigned a
priority value. Configured through the
The number of lines included in the QoS log. Configured through the
qos log lines command.
The level of log detail. Configured through the
March 2011
show qos config
qos phones command.
qos log level command.
page 25-59
qos
qos