Policy Condition Fragments - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

policy condition fragments

policy condition fragments
Associates TCP packet fragments with a policy condition.
policy condition condition_name fragments
policy condition condition_name no fragments
Syntax Definitions
condition_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of the command to remove TCP packet fragments from a condition; however, at least
one classification parameter must be associated with a condition.
Examples
-> policy condition cond6 fragments
-> policy condition cond7 no fragments
Release History
Release 7.1.1; command was introduced.
Related Commands
qos apply
policy condition
show policy condition
MIB Objects
alaQoSConditionTable
alaQoSConditionName
alaQoSConditionFragments
alaQoSAppliedConditionTable
alaQoSAppliedConditionName
alaQoSAppliedConditionFragments
page 26-116
The name of the condition. May be an existing condition name or a new
condition.
Applies configured QoS and policy settings to the current configuration.
Creates a policy condition.
Shows information about policy conditions configured on the switch.
QoS Policy Commands
OmniSwitch CLI Reference Guide March 2011