Newfs - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

newfs

newfs
Deletes the complete /uflash file system and all files within it, replacing it with a new, empty /uflash file
system. Use this command when you want to reload all files in the file system or in the unlikely event that
the /uflash file system becomes corrupt.
newfs /uflash
Syntax Definitions
/uflash
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
It is recommended that you preserve all required image and configuration files by saving them to a
remote host before executing the newfs command.
•
Do not power-down the switch after running the newfs command until you reload all required image
and configuration files.
Examples
-> newfs /uflash
Release History
Release 7.1.1; command introduced.
Related Commands
N/A
MIB Objects
systemServices
systemServicesArg1
systemServicesAction
page 42-22
This indicates that the complete file system will be replaced.
File Management Commands
OmniSwitch CLI Reference Guide March 2011