Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1579

QoS Commands
Usage Guidelines
•
Use the no form of this command to change the type of messages that will be logged or to return
debugging to its default state.
•
Use this command to troubleshoot QoS events on the switch.
Examples
-> debug qos flows queue
-> qos debug no flows no queue
-> debug no qos
Release History
Release 7.1.1; command was introduced.
Related Commands
qos forward log
qos log lines
show qos log
MIB Objects
alaQoSConfigTable
alaQoSConfigDebug
OmniSwitch CLI Reference Guide
Enables the switch to send events to the PolicyView application in real
time.
Configures the number of lines in the QoS log.
Displays the log of QoS events.
March 2011
debug qos
page 25-19