Ethernet-Service Svlan Source-Learning - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ethernet-service svlan source-learning

ethernet-service svlan source-learning
Configures the status of source learning on a VLAN Stacking VLAN (SVLAN) used for tunneling
customer traffic
ethernet-service svlan svlan1[-svlan2] source-learning {enable| disable}
Syntax Definitions
svlan1
[-svlan2]
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
By default, source MAC address learning is enabled on all the SVLANs.
•
Disabling source learning on an SVLAN clears all the dynamically learned MAC addresses associated
with the VLAN from the MAC address table.
•
Static MAC addresses associated with an SVLAN are not cleared when source learning is disabled for
the SVLAN.
•
Use the disable option with this command to disable the source MAC address learning.
Examples
-> ethernet-service svlan 20 source-learning enable
-> ethernet-service svlan 21-25 source-learning enable
-> ethernet-service svlan 20-25 source-learning disable
Release History
Release 7.1.1; command introduced.
Related Commands
ethernet-service svlan
show ethernet-service vlan
page 34-4
The VLAN ID number identifying the SVLAN.
The last SVLAN ID number in a range of SVLAN IDs.
default
enable
Creates a VLAN Stacking VLAN (SVLAN).
Displays a list of SVLANs configured for the switch.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide March 2011