Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1805

QoS Policy Commands
output definitions
Action Name
State
Policy Action Parameters
Release History
Release 7.1.1; command was introduced.
Related Commands
policy action
MIB Objects
alaQoSActionTable
alaQoSActionName
alaQoSActionSource
alaQoSActionDisposition
alaQoSActionShared
alaQoSActionMinimumBandwidth
alaQoSActionMaximumBandwidth
alaQosActionMaximumDepth
alaQoSAppliedActionTable
alaQoSAppliedActionName
alaQoSAppliedActionSource
alaQoSAppliedActionDisposition
alaQoSAppliedActionShared
alaQoSAppliedActionMinimumBandwidth
alaQoSAppliedActionMaximumBandwidth
alaQoSAppliedActionMaximumDepth
OmniSwitch CLI Reference Guide
The name of the action, configured through the
mand.
This field appears if the action was created or modified but not yet
applied to the QoS configuration. When the qos apply command is
issued, this field no longer displays.
Displays the configured policy action parameters.
Creates a policy action. A QoS action is a particular set of bandwidth
and queue parameters that may be applied to a flow matching particular
QoS conditions.
March 2011
show policy action
policy action com-
page 26-165