ip dvmrp interface
ip dvmrp interface
Enables or disables the DVMRP protocol on a specified interface.
ip dvmrp interface {interface_name}
no ip dvmrp interface {interface_name}
Syntax Definitions
interface_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to delete an interface.
Examples
-> ip dvmrp interface vlan-10
-> no ip dvmrp interface vlan-10
Release History
Release 7.1.1; command was introduced.
Related Commands
ip dvmrp admin-state
ip dvmrp interface metric
show ip dvmrp interface
MIB Objects
dvmrpInterfaceTable
dvmrpInterfaceLocalAddress
dvmrpInterfaceStatus
page 22-6
The name of the interface.
Globally enables or disables the DVMRP protocol on the switch.
Configures the distance metric for an interface, which is used to cal-
culate distance vectors.
Displays information for all multicast-capable interfaces.
OmniSwitch CLI Reference Guide
DVMRP Commands
March 2011