Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1872

show aaa server
-> show aaa server ldap2
Server name = ldap2
Server type
Host name 1
Retry number
Timeout (in sec)
Port
Domain name
Search base
.
output definitions
Server name
Server type
Host name
IP address
Retry number
Timeout
Port
Encryption enabled
Domain name
Search base
Authentication port
Accounting port
Release History
Release 7.1.1; command was introduced.
Related Commands
aaa radius-server
aaa ldap-server
aaa tacacs+-server
MIB Objects
aaaServerTable
aaasName
aaasHostName
page 28-42
= LDAP,
= ors40535,
= 3,
= 2,
= 389,
= manager,
= c=us,
The name of the server. A RADIUS, TACACS+ or LDAP server name
is defined through the aaa radius-server, aaa tacacs+-server, and aaa
ldap-server commands respectively.
The type of server (ACE, LDAP, TACACS+, or RADIUS).
The name of the primary LDAP, TACACS+, or RADIUS host.
The IP address(es) of the server.
The number of retries the switch makes to authenticate a user before
trying the backup server.
The timeout for server replies to authentication requests.
The port number for the primary LDAP or TACACS+ server.
The status of the encryption.
The super-user or administrative distinguished name in the format rec-
ognized by the LDAP-enabled directory servers.
The search base recognized by the LDAP-enabled directory servers.
The UDP destination port for authentication requests.
The UDP destination port for accounting requests.
Configures or modifies a RADIUS server for Authenticated Switch
Access.
Configures or modifies an LDAP server for Authenticated Switch
Access.
Configures or modifies an TACACS+ server for Authenticated Switch
Access.
OmniSwitch CLI Reference Guide
AAA Commands
March 2011