Snmp-Trap To-Webview - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

SNMP Commands

snmp-trap to-webview

Enables the forwarding of traps to WebView.
snmp-trap to-webview {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default, WebView forwarding is enabled.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
To view the current WebView forwarding status, use the show snmp-trap config command.
Examples
-> snmp-trap to-webview enable
-> snmp-trap to-webview disable
Release History
Release 7.1.1; command was introduced.
Related Commands
show snmp-trap config
MIB Objects
trapFilterTable
trapToWebView
OmniSwitch CLI Reference Guide
Enables WebView forwarding. When WebView forwarding is enabled,
all traps sent by switch applications are also forwarded to WebView.
This allows a WebView session to retrieve the trap history log.
Disables WebView forwarding.
Displays the SNMP trap information, including the current status for
trap absorption and WebView forwarding.
March 2011
snmp-trap to-webview
page 45-19