Qos Log Lines - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Commands

qos log lines

Configures the number of lines in the QoS log.
qos log lines lines
Syntax Definitions
lines
Defaults
parameter
lines
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
To turn off logging, enter 0 for the number of log lines. (Note that error messages will still be logged.)
•
If you change the number of log lines, you may clear all messages in the QoS log. To avoid clearing all
messages in the log, enter the qos log lines command in the boot.cfg file. The log length will be
changed at the next reboot.
Examples
-> qos log lines 5
-> qos log lines 0
Release History
Release 7.1.1; command was introduced.
Related Commands
show qos log
MIB Objects
alaQoSConfigTable
alaQoSConfigLogLines
OmniSwitch CLI Reference Guide
The number of lines included in the QoS log. A value of zero turns off
logging to the console. The range is 0–512.
default
10000
Displays the log of QoS events.
March 2011
qos log lines
page 25-9