Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 2198

rm
rm
Permanently deletes an existing file.
rm [options] [path/filename]
Syntax Definitions
options
filename
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Separate the multiple directory names that are part of the path with a slash (/). Refer to the examples
below.
•
Use care when deleting files. Depending on your switch and network configurations, specific configu-
ration and image files must be present for your system to work properly.
•
This command can also be used on the secondary CMM.
Examples
-> rm test_config_file
-> rm flash/test_config_file
-> rm ?
BusyBox v1.16.1 (2010-12-06 23:23:38 PST) multi-call binary.
Usage: rm [OPTIONS] FILE...
Remove (unlink) FILEs
Options:
-i
-f
-R,-r
Release History
Release 7.1.1; command introduced.
page 42-10
Use the '?' on the command line for a list of options.
Specifies the file or directory path.
Always prompt before removing
Never prompt
Recurse
File Management Commands
OmniSwitch CLI Reference Guide March 2011