Show Ntp Server Client-List - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ntp server client-list

show ntp server client-list
Displays the information about the current NTP clients connected to the server.
show ntp server client-list
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use this command to display the tabular information on the current NTP client connected to the server
(switch).
Examples
-> show ntp server client-list
IP Address
------------------+-------+----------
172.23.0.201
10.255.24.121
output definitions
IP Address
Ver
Key
Release History
Release 7.1.1; command was introduced.
page 40-28
Ver Key
4 0
4 0
The client IP address.
The version of NTP the server is using. Versions 3 and 4 are valid.
The NTP server's public key. This must be accurate and the same as the
NTP server or the client switch will not be able to synchronize with the
NTP server. A zero (0) means there is no key entered.
Network Time Protocol Commands
OmniSwitch CLI Reference Guide March 2011